480.00 mhz saw filter phone: +86 (10) 5820-3910 fax: +86 (10) 5820-3915 email: sales@vanlong.com web: http://www. vanlong.com ? 2006 by vanlong technology co., ltd. SF480-7 z ideal for dbs receivers, if filter z constant group delay z improved esd capability by integrated shunt resistors z rugged, hermetic, low profile to-39 package z complies with directive 2002/95/ec (rohs compliant) absolute maximum rating (ta=25 c) parameter rating unit ac voltage between any two pins v pp 5 v dc voltage between any two pins v dc 0 v operating temperature range t a -25 ~ +85 c storage temperature range t stg -40 ~ +85 c electronic characteristics parameter sym minimum typical maximum unit center frequency (25 c) between 3db point tolerance from 480.00 mhz f c ? f c ns - 480.00 - ns 1.0 mhz mhz insertion attenuation - 21.0 22.5 db pass bandwidth 3db bw 3 - 36.2 - mhz relative attenuation 462.00 mhz 498.00 mhz lower sidelobe 430.00 ? 455.00 mhz upper sidelobe 510.00 ? 530.00 mhz rel - - 36 36 3.0 2.9 41 42 4.2 4.2 - - db db db db reflected wave signal suppression 0.1 s ? 2.0 s after main pulse - 40.0 48.0 - db amplitude ripple (p-p) 467.00 ? 493.00 mhz ? - 0.5 1.0 db group delay 480.00 mhz - 274.0 - ns group delay ripple (p-p) 466.50 ? 493.50 mhz ? - 2.0 3.0 ns temperature coefficient of frequency ftc - -86 - ppm/k ns = not specified notes: 1. the frequency f c is defined as the midpoint between the 3db frequencies. 2. unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 ? test system with vswr 1.2:1. the test fixture l and c are adjusted for minimum insertion loss at the filter center frequency, f c . note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. the specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. all equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. for questions on technology, prices and delivery please contact our sales offices or e-mail sales@vanlong.com. SF480-7
480.00 mhz saw filter phone: +86 (10) 5820-3910 fax: +86 (10) 5820-3915 email: sales@vanlong.com web: http://www. vanlong.com ? 2006 by vanlong technology co., ltd. SF480-7 package dimensions (to-39) marking test circuit typical frequency response SF480-7 480.00 electrical connections terminals connection 1 input/output 2 output/input 3 case ground package dimensions dimensions nom. (mm) tol. (mm) a 9.35 0.10 b 3.40 0.10 c 3.00 0.20 d 0.45 0.10 e 5.08 0.10 f 2.54 0.20 g 1.0 from 50 ? source to 5 0 ? load ink marking color: black or blue
|
